Suitable for belt width 35 mm, thickness 2.5 mm and rope up to Ø10 mm. The locking mechanism keeps the anchor in the raised position without additional fastening of the rope. It consists of a body with a swivel-tilt mechanism and an adapter on which there are end slots. Between the splines are washers with a pitch of 7.5 degrees. This makes it possible to adjust the convenient position. The body can be rearranged in the lock. For this, it is necessary to take it out and turn it 30 degrees around its axis. The parts are made of high-strength plastic - polyamide. The rope, which is threaded between the body and the stop element made from polyamide, has the ability to easily pass in one direction, and in the other direction to stop it due to spikes on the locking mechanism. By pressing the tab of the locking mechanism, the rope or belt can easily descend on a roller which is fixed to the body. On the adapter that is inserted into the lock there is a sealing ring, it must be lubricated with silicone grease. Silicone grease is designed to lubricate the moving parts of the lock and adapter with a sealing ring, lubrication prevents the formation of a water film and does not allow it to freeze, which ensures reliable operation in low temperature conditions.
|Shipping wieght kg||0.440|