Suitable for rope up to Ø10 mm. Supplied with a guiding loop for rope made of stainless steel. The rope is threaded between the loop and the roller made from polyamide, which is fixed to the body of the anchor assembly. This rope can easily pass in two directions, and it is fastened to the roller knot by means of a loop made of the same rope. It consists of a housing with a rotatably tilted mechanism and an adapter. The adapter has end splines, between which there are washers with a pitch of 7.5 degrees. This makes it possible to adjust the comfortable position.
The case can be rearranged in the lock - it is necessary to take out the case and rearrange it for 30 degrees around its axis. The adapter has a sealing ring, it must be lubricated with silicone grease. Silicone grease is designed to lubricate the moving parts of the lock and the adapter with a sealing ring. Lubrication prevents the formation of a water film and does not allow it to freeze, which ensures reliable operation in low temperature conditions.
|Shipping wieght kg||0.430|