The "Liquid Patch" glue appeared on the market relatively recently and is widely used for the repair of products made of polyvinyl chloride (PVC).

Repair of inflatable pvc boats. Elimination of punctures.

 

It was developed using a completely new technology, and it's not quite glue. As the manufacturers themselves say, it is nothing more than PVC in its pure form.

Pros of the glue "Liquid Patch"


Distinctive features of the "Liquid Patch", thanks to which it became popular.

  • High adhesion. The composition creates a strong connection between the edges of the damage, as it penetrates into the upper layer of the material.
  • Resistance to ultraviolet. Do not change its performance when exposed to UV and direct sunlight.
  • Principle of vulcanization. Penetrates into the material, creating a new top layer.
  • Elasticity. After drying, it repeats the properties of the base material.
  • Resistance to damage. The composition is not afraid of scratches and punctures.
  • Low cost. The price of one tube of glue in volume of 40 grams varies within 400 rubles.
  • Ease of use. Instruction for use is indicated on the package, and consists of three short points: degrease, wait, allow to dry.

Repair of inflatable pvc boats. Elimination of punctures.

 

 

What else you need to know about the adhesive "Liquid Patch"

  • The drying time of this glue is 24 hours. However, the absolute strength of the "Liquid Patch" can be expected for 8-10 days after repair.
  • It has a high resistance to temperatures above 50, freezes at -16 degrees Celsius.
  • Store the glue in a dark, cool place, as far as possible from open flames and heaters.
  • Shelf life of this product is two years from the date that the manufacturer indicated on the tube.

How to use "Liquid Patch" glue for repair of inflatable products


Repair of inflatable pvc boats. Elimination of punctures.

Repair of inflatable pvc boats. Elimination of punctures.

Repair of inflatable pvc boats. Elimination of punctures.

 

What you need:

  • "Liquid Patch";
  • degreaser;
  • pump.

Instruction:

  1. Pump the air out of the boat using the pump.
  2. Lay out the boat the way it will be convenient for you to work with it.
  3. Degrease the surface, which will be applied glue. To do this, you can use alcohol, vodka, acetone, liquid to remove varnish.
  4. Cut the tube with the glue with your hands.
  5. Apply the compound with a thick thick layer to the damage site. Leave for 24 hours until completely dry.

VIDEO INSTRUCTION


Elimination of cuts.

What you need:

  • "Liquid Patch";
  • degreaser;
  • ordinary thread, needle;
  • insulation tape;
  • pump.

Instruction:

  1. Pump the air out of the boat using the pump.
  2. Use ordinary threads to sew a seam. It is enough to apply a few seams to join the edges of the cut.
  3. Cut the tube with the glue with your hands. Apply a small amount of the composition to the cut site. Leave for 24 hours.
  4. After this time, using an insulating tape, mark the cut edges. This should be done in order not to apply excess amount of glue and not to spoil the appearance of the product.
  5. Apply a second coat and allow to dry completely.

VIDEO DESCRIPTION

Repair of air mattresses.

To repair the mattress, depending on the nature of the damage, you will need the same set of materials and tools as for repairing boats.

The procedure is exactly the same. The only difference is the mattress is smaller, so the work will be less time consuming.