The bottom surface of the site is equipped with double-sided tape of increased strength. The kit is especially relevant for cases where it is required to install accessories on the rigid side of the vessel without drilling, or when drilling is in principle undesirable (for example, the surface of the vessel is made of fiberglass).
How to install?
The mounting PVC pad from the kit after the removal of the protective film is glued to the board at the selected location. Then it must be strongly pressed or used load. An hour after gluing, a lock can be installed on the pad, in which various accessories from the FASTen® series are fixed. It is possible to launch the vessel on water and use accessories under load 24 hours after attaching the mounting platform.
Moving parts of the lock must be periodically treated with silicone grease (included), which prevents the formation of a water film and ensures reliable operation in low temperature conditions.
|Shipping wieght kg||0.490|
|Colour||Black, Grey, White|