The product consists of products made of polyamide. This is the body of the holder, on which is installed the ring lock of the coil and the rod's forearm with the possibility of rotating it on the body. Made for the purpose of fixing the rod reel during transportation. On the holder there is a rear stop which has two positions. The rear stop, in parallel to the body position, serves as a stop for the rod. It also serves as a latch in one position, which does not allow you to turn the rod if it has a characteristic slot in the form of a cross. To the body of the holder, with the help of a bolt made of stainless steel and a knob-nut, the adapter is screwed. An adjusting washer with an angle of inclination of 7.5 degrees is placed between the bolt and the handle-nut. The spring is made of stainless steel and is located between the body and the adapter. This allows a rapid divergence of the engaging splines. The adapter has a sealing ring to prevent water or dirt from entering. O-ring must be periodically lubricated with silicone grease. On the body of the holder there is an opening for fixing the rod with a safety leash.
Installing the rod holder in the lock and adjusting the required position it can be used. The kit includes a lock, mounting platform and spare parts for self-installation of the holder on the inflatable balloon of the boat.
|Shipping wieght kg||0.799|